模板:Infobox spring

File:Test Template Info-Icon - Version (2).svg 模板文件[檢視] [編輯] [歷史] [清除快取]

此模板可用於建立泉（包括間歇泉或溫泉）的資訊框。

使用方法

{{{name}}}
{{{other_name}}}
[[File:{{{photo}}}|{{{photo_width}}}|alt={{{photo_alt}}}|upright=1.1|{{{photo_alt}}}]] {{{photo_caption}}}
名稱來源	{{{name_origin}}}
國家／地區	{{{country}}}
位置	{{{location}}}
座標	{{{coordinates}}}{{{coords_ref}}}
源頭	{{{spring_source}}}
海拔	{{{elevation}}}
類型	{{{type}}}
供水對象	{{{provides}}}
流量分級	{{{magnitude}}}
噴發高度	{{{height}}}
噴發頻率	{{{frequency}}}
噴發持續時間	{{{duration}}}
流量	{{{flow}}}
溫度	{{{temperature}}}
深度	{{{depth}}}
地形圖	{{{topo}}}
{{{embedded}}}

一般用法		所有參數
{{Infobox spring | name = | photo = | photo_width = | photo_caption = | map = <!-- 或 | map_image = --> | map_width = | map_caption = | name_origin = | country = | location = | elevation = | coordinates = | coords_ref = | mapframe = | hot_spring_type = | height = | duration = | frequency = | discharge = | temperature = | depth = }}		{{Infobox spring | name = | other_name = | photo = | photo_width = | photo_alt = | photo_caption = | map = <!-- 或 | map_image = --> | relief = | map_width = | map_alt = | map_caption = | mark = | marker_width = | label = | label_position = | name_origin = | country = | location = | spring_source = | elevation = | coordinates = | coords_ref = | mapframe = | hot_spring_type = | type = | provides = | magnitude = | height = | duration = | frequency = | discharge = | temperature = | depth = | child = | embedded = }}

參數說明

參數	說明
name	官方名稱。
other_name	其他常用名稱。
photo	圖像檔案名稱。對於間歇泉，建議優先選用噴發時的照片。
photo_width	圖像顯示寬度（單位：像素）。
photo_alt	為視障讀者提供的圖像替代文本，詳見WP:ALT。
photo_caption	顯示於圖像下方的圖注。建議註明照片的拍攝年月。
位置相關參數
map	要顯示的位置圖名稱。若需使用靜態圖像，請改用|map_image=。
map_image	靜態地圖圖像的檔案名稱。若需使用位置圖，請改用|map=。
map_relief	顯示地形圖。詳見Template:Location map#地形圖參數。
map_size 或 map_width	地圖圖像的顯示寬度（單位：像素）。
map_alt	地圖圖像的替代文本，參見WP:ALT。
map_caption	顯示於地圖圖像下方的說明文字（可選）。
mark	用於標記點的圖像，預設為Red pog.svg。更多選項詳見Template:Location map。
marker_width	標記點圖像的顯示寬度（單位：像素），預設值為8。
label	顯示於標記點旁的標註文字。
label_position	指定標註文字相對於標記點的方位，有效值為left（左）、right（右）、top（上）、bottom（下）及none（無）。需配合上方的label使用。
coordinates	坐標，使用{{coord}}模板。
coords_ref	通過<ref>...</ref>標籤引用坐標來源。
mapframe	使用{{infobox mapframe}}的地圖框架。
其他參數
name_origin	名稱的來源、命名者（如有記載）。
location	位置描述。
spring_source	泉水的水源。
elevation	海拔高度。
hot_spring_type	溫泉類型，可選值包括間歇泉、火山噴氣孔、泥火山或溫泉。間歇泉可進一步區分為錐形或噴泉型。非地熱泉請使用下方的type參數。
type	泉的類型（僅用於非溫泉；溫泉請使用上方的hot_spring_type）。
provides	泉水匯入的水體名稱。
height	（適用於間歇泉）噴發高度的最小至最大值（例如：「15—20米」）。
frequency	（適用於間歇泉）噴發的平均間隔頻率。
duration	（適用於間歇泉）噴發持續時間的範圍。
discharge	間歇泉或湧泉的流量數據。
magnitude	泉的流量分級。
temperature	（適用於溫泉池）平均水溫。
depth	（適用於溫泉池）平均深度。
child	用於將此模板嵌套於其他模板中。
embedded	用於將其他模板嵌套於此模板中。

範例

Daisy Geyser
File:Daisy Geyser erupting in Yellowstone National Park edit.jpg Daisy Geyser during an eruption
名稱來源	Hague Geological Surveys, 1880s
位置	Upper Geyser Basin, Yellowstone National Park, Teton County, Wyoming
座標
海拔	7,329英尺（2,234公尺）
溫度	84.5 °C (184.1 °F)

{{Infobox spring
| name = Daisy Geyser
| photo = Daisy Geyser erupting in Yellowstone National Park edit.jpg
| photo_width = <!-- omitted to display at user's default size -->
| photo_caption = Daisy Geyser during an eruption
| map_image = NorthernSectionUpperGeyserBasin-Daisy.jpg
| map_caption = Map of Upper Geyser Basin
| map_size = 200
| name_origin = Hague Geological Surveys, 1880s
| location = Upper Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|28|12|N|110|50|42|W|display=inline}}
| coords_ref = 
| elevation = {{convert|7329|ft|0}}
| temperature = 84.5 °C (184.1 °F) 
}}

Big Cone
File:Big cone.jpg Big Cone Geyser
位置	West Thumb Geyser Basin, Yellowstone National Park, Teton County, Wyoming
座標
海拔	7,864英尺（2,396.9公尺）

{{Infobox spring
| name = Big Cone
| photo = Big cone.jpg
| photo_width = 400px <!-- if a size in pixels is specified, the image will not display any larger than 280px -->
| photo_caption = Big Cone Geyser
| map_image = WestThumbGeyserBasin-Big Cone.jpg
| map_caption = West Thumb Geyser Basin
| map_alt = Map shows Big Cone is in the West Thumb Geyser Basin.
| map_size = 
| location = West Thumb Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|25|03|N|110|34|14|W|type:landmark_region:US-WY}}
| coords_ref = 
| elevation = {{convert|7864|ft|m|1}}
}}

Geographical coordinate method

A mark can be superimposed on one of a set of special map templates. If a valid map name is specified this is the method the template will attempt to use. To display a mark, the geographic coordinates must be specified using the {{Coord}} template. See the documentation for {{Location map}}. The parameters for this template correspond with a subset of the parameters for Template:Location map. A map template can be found using these sources:

List of templates - Many of the items listed here are redirects and a few templates may not function as expected.

Category:Location map templates - templates sorted by category.

Special:WhatLinksHere/Template:Location map/Info - a search that might help.

Special:Prefixindex/Template:Location map - another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for the for Alberta, Canada is Module:Location map/data/Canada Alberta. In this case specify map=Canada Alberta or, in this case, map=Alberta. The following example does not produce output that is optimum for use with the geysers of Yellowstone but demonstrates the method.

Big Alcove Spring
座標

{{Infobox spring
| name = Big Alcove Spring
| map = USA Wyoming
| map_alt = Big Alcove Spring is located in the northwestern Wyoming
| map_caption = Location of Big Alcove Spring in Wyoming
| map_width = 200
| label = Big Alcove Spring
| coordinates = {{coord|44|43|8|N|110|42|24|W|region:US-WY|display=inline <!-- just to be tidy -->}}
}}

The label is optional. By default it is usually displayed to the left of the mark.

模板資料

模板資料

以下是該模板的模板資料，適用於視覺化編輯器等工具。

Infobox spring模板資料

<templatedata> { "params": { "child": {}, "name": { "aliases": [ "名稱", "名稱", "spring_name" ], "label": "名稱", "type": "string", "suggested": true }, "other_name": { "aliases": [ "其他名稱", "其他名稱" ], "label": "其他名稱", "type": "string" }, "photo": { "aliases": [ "image" ], "label": "照片", "description": "圖像檔案名稱。對於間歇泉，建議優先選用噴發時的照片。", "type": "wiki-file-name", "suggested": true }, "photo_width": { "aliases": [ "image_size" ], "label": "照片大小", "description": "圖像顯示寬度（單位：像素）。", "type": "string" }, "photo_alt": { "aliases": [ "alt" ], "label": "照片替代文字", "description": "為視障讀者提供的圖像替代文本，詳見WP:ALT。" }, "photo_caption": { "aliases": [ "image_caption" ], "label": "照片說明", "description": "顯示於圖像下方的圖注。建議註明照片的拍攝年月。", "suggested": true }, "map": { "label": "位置圖名稱", "description": "要顯示的位置圖名稱。" }, "map_width": { "label": "位置圖寬度" }, "relief": { "label": "位置圖地形" }, "label": {}, "label_position": {}, "map_caption": {}, "map_alt": {}, "mark": {}, "marker_width": {}, "marker_size": {}, "coordinates": { "aliases": [ "coords" ], "label": "坐標", "suggested": true, "description": "坐標，使用模板。" }, "map_image": { "label": "地圖圖像", "description": "靜態地圖圖像的檔案名稱。", "type": "wiki-file-name" }, "map_size": { "label": "地圖圖像大小" }, "name_origin": { "label": "名稱來源", "description": "名稱的來源、命名者（如有記載）。" }, "location": { "aliases": [ "位置" ], "label": "位置", "suggested": true }, "coordinates_ref": { "aliases": [ "coords_ref" ], "label": "坐標參考資料", "description": "通過標籤引用坐標來源。" }, "spring_source": { "label": "源頭", "description": "泉水的水源。" }, "elevation": { "label": "海拔", "description": "海拔高度。" }, "hot_spring_type": { "label": "溫泉類型", "description": "溫泉類型，可選值包括間歇泉、火山噴氣孔、泥火山或溫泉。間歇泉可進一步區分為錐形或噴泉型。非地熱泉請使用下方的「類型」參數。" }, "type": { "label": "類型", "description": "泉的類型（僅用於非溫泉；溫泉請使用上方的「溫泉類型」）。" }, "provides": { "label": "供水對象", "description": "泉水匯入的水體名稱。" }, "magnitude": { "label": "流量分級", "description": "泉的流量分級。" }, "height": { "label": "噴發高度", "description": "（適用於間歇泉）噴發高度的最小至最大值（例如：「15—20米」）。" }, "frequency": { "label": "噴發頻率", "description": "（適用於間歇泉）噴發的平均間隔頻率。" }, "duration": { "label": "噴發持續時間", "description": "（適用於間歇泉）噴發持續時間的範圍。" }, "flow": { "label": "流量", "description": "間歇泉或湧泉的流量數據。" }, "discharge": { "label": "湧水量" }, "temperature": { "label": "溫度", "description": "（適用於溫泉池）平均水溫。" }, "depth": { "label": "深度", "description": "（適用於溫泉池）平均深度。" }, "commons": { "label": "維基共享資源" }, "topo": { "aliases": [ "地形圖", "地形圖" ], "label": "地形圖" }, "embedded": {} }, "description": "此模板可用於建立泉（包括間歇泉或溫泉）的資訊框。", "paramOrder": [ "child", "name", "other_name", "photo", "photo_width", "photo_alt", "photo_caption", "map", "map_width", "relief", "label", "label_position", "map_caption", "map_alt", "mark", "marker_width", "marker_size", "map_image", "map_size", "name_origin", "location", "coordinates", "coordinates_ref", "spring_source", "elevation", "hot_spring_type", "type", "provides", "magnitude", "height", "frequency", "duration", "flow", "discharge", "temperature", "depth", "commons", "topo", "embedded" ], "format": "block" } </templatedata>

上述文件嵌入自Template:Infobox spring/doc。（編輯 | 歷史）
編者可以在本模板的沙盒（建立 | 鏡像）和測試樣例（建立）頁面進行實驗。
請在/doc子頁面中添加分類。本模板的子頁面。